CCP183 Ethernet/IP Training

A-BCCP183 MFG #: CCP183
$2,259.00 / per person
  • Offerings: Trainings
  • Brand Name: Allen-Bradley

Learn Ethernet/IP Configuration and Troubleshooting

Develop the skills you need to get your network up and running. But the training doesn’t stop there. With CCP183 Ethernet/IP Training from Rockwell Automation®, you’ll also learn how to monitor diagnostics and resolve issues. And you’ll gain hands-on experience with Stratix® and Studio 5000 Logix Designer®.

What You’ll Learn

You’ll learn how to use web-based technologies and modify a web serve module’s data views and tag values to monitor diagnostic information. This course creates troubleshooting scenarios using Ethernet/IP network media and components. With this hands-on training, you’ll run diagnostic tests to resolve system and port issues as well as perform common functions like resetting a switch.

CCP183 Course Agenda

Day 1

  • Assigning a Computer’s IP Address
  • Pinging a Device’s IP Address
  • Assigning IP Addresses Using RSLinx Classic Software and Rotary Switches
  • Assigning IP Addresses Using BOOTP/DHCP Server Software
  • Configuring Stratix 5700 Switch Settings Using the Express Setup
  • Creating and Assigning VLANs

Day 2

  • Configuring DHCP Persistence
  • Configuring Network Address Translation (NAT)
  • Configuring Port Security and Traffic Monitoring
  • Monitoring Stratix 5700 Switch Status and Performance
  • Managing a Stratix 5700 Switch Using a Studio 5000 Logix Designer Project

Day 3

  • Isolating Ethernet/IP Network Problems
  • Diagnosing Problems with Ethernet/IP Modules
  • Diagnosing Problems with Ethernet/IP Network Components
  • Monitoring an Ethernet/IP Network Using Web-Enabled Technologies
  • Troubleshooting a Stratix 5700 Switch
  • Updating Stratix 5700 Switch Firmware

Should You Attend?

If you’re a technician or an engineer who is responsible for deploying and maintaining Industrial Automation and Control System (IACS) networks, this is the course you’ve been looking for. This interactive learning experience will help you build the skills you need. Your course package will enhance your knowledge with a student manual, a lab book, and the “Ethernet/IP Procedures Guide.”

Prerequisites

To successfully complete CCP183 Ethernet/IP Training and gain the configuration and troubleshooting skills you need, the following is required:

  • CCP146 Completion of the Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals course (CCP146) or equivalent experience
Dates & Locations