$207.56 / EA
No stock in your WHS
  • Offerings: Products
  • Brand Name: Scotch-Weld™
  • Output Rate: 2.6 to 3.5 lb/hr
  • Drive Type: Pneumatic
3M™ hot melt applicator TC with quadrack converter and palm trigger is a lightweight, easy to control applicator that dispenses up to 3.5 lb of continuous adhesive per hour thanks to the included quadtrack convertor and palm trigger. It maintains a fixed temperature of 385 deg F (196 deg C) and is designed for use with 5/8 x 8 in Q lowmelt adhesive sticks only. Dispenses up to 3.5 lb of hot melt adhesive per hour 3M™ hot melt applicator TC with quadrack converter and palm trigger uses 120V /150W power to maintain a 385 deg F (196 deg C) temperature for consistent, reliable dispensing of 5/8 x 8 in Q hot melt adhesives. They built this lightweight applicator (only 13.8 oz.)for ease of use, with the palm trigger designed to provide variable flow control. The quadrack convertor helps keep production processes moving by allowing use of 8 in hot melt sticks (in comparison to 3 in sticks for non-Quadrack applicators). Recommended applications small joint assembly large surface lamination mounting and trim attachment point of purchase displays trade exhibits quadrack helps adhesive flow smoothly and evenly the innovative quadrack application attachment system utilizes hot melt glue sticks up to 8 in long that helps reduce reloading time and when combined with the palm trigger system, eliminates the need to forcibly press on the hot melt adhesive stick with your thumb. Understanding hot melt applicators hot melt adhesive applicators, commonly called "glue guns" are tools used to apply liquefied thermoplastic adhesives and are available in low and high temperature versions. Low temperature adhesive applicators operate at approximately 250 deg F (121 deg C) and are beneficial when bonding heat sensitive materials such as electronics, plastics and cloth. High temperature applicators operate at a minimal temperature of approximately 380 deg F (193 deg C) and can dispense adhesives that produce a stronger bond than low temperature adhesives. Melted adhesive is extruded through a nozzle by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Different nozzles can be used to apply thin, wide strips or narrow, thicker beads. Hot melt adhesive generally sets quickly, ranging from a few seconds to a few minutes, depending on the adhesive formulation.
  • Cord Type
  • Manufacturer Name
  • Overview
  • Series
  • Voltage Rating


  • Delivers up to 3.5 lb of adhesive per hour
  • Palm trigger improves operator comfort
  • Quadrack converter provides positive feed through
  • Easy to use
  • Rugged and reliable design provides dependable operation
  • Hot melt operating temperature


  • Automotive
  • Construction
  • Consumer Goods
  • Electronics
  • Furniture
  • General Industrial
  • Military and Government
  • Packaging
  • Retail
  • Signage
  • Specialty Vehicle
  • Transportation and Woodworking
TC Series
120 VAC