MIL4208-1 MFG #: 4208-1
$1,699.00 / EA
No stock in your WHS
  • Offerings: Products
  • Chuck Size: 1-1/4 IN
  • Horsepower: 2 hp
  • Drill to Center From Base: 4-3/8 in
  • Spindle Speed: 250/500 rpm
  • Voltage Rating: 120 VAC
No job is too large for this heavy-duty drill press. This unit features the 4203 adjustable-position, variable-speed base and the 4297-1 1-1/4 in drill motor. Built for production drilling, this 11.5-amp drill can handle the toughest drilling jobs with up to a 1-1/4 in threaded hole capacity. The two-speed motor runs at 250 and 500 rpm, geared low for maximum torque. It can produce up to 1600 pounds of drill point pressure with a 1 in steel plate. Feedback speed control helps you maintain speed during operation. This unit features a No. 3 Morse Taper Chuck, for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling.
  • Overall Height
  • Overview
  • Type
  • Spindle Travel
  • Number of Spindle Speeds
  • Manufacturer Name
  • Drill Point Pressure
  • Spindle Taper
  • Amperage Rating
25-1/4 in


  • Powerful 11.5 A motor, engineered for the toughest applications
  • Dual mount gear case with reverse mount permits tight quarter drilling
  • 1-1/4 in tap capacity, taps up to 1 in, 14 threaded holes
  • Maximum force, develops up to 1600 lb of drill point pressure with a 1 in steel plate
  • Solid state electronic switching, offers faster, smoother and quieter switching for a longer product lifespan
  • Line lockout, prevents tool from operating if voltage is restored to an interrupted line
  • Forward/reverse electronic feedback speed control, soft start and 6 ft safety chain
  • 9 ft fixed cord
  • Red/grey/black finish
  • Computer controlled reverse
  • Motor magnet lockout prevents de-mag during operation
  • Full wave holding power
  • Metal base
  • Grounded construction
  • 11 in L x 4-1/4 in W base
Adjustable Position Heavy Duty
11 in
Milwaukee Tool
1530/1600 lb
#3 Morse
12.5 A