HUBWS2000I

HUBWS2000I MFG #: WS2000I
$62.04 / Each
No stock in your WHS
  • Brand Name: Hubbell Wiring Device-Kellems
  • Offerings: Products
The Hubbell HUBWS2000I wall switch is designed for use on 120 or 277V AC circuits, no neutral required, fast retrofits. Built in photocell prevents lights from turning ON with sufficient natural light. 3-way capable, matching wallplate included.
  • Type
  • Supply Voltage
  • Standards
  • Special Features
  • Sensor
  • Sensitivity
  • Sensing Range
  • Overview
  • Operating Temperature
  • Mounting
  • Manufacturer Name
  • Load
  • Connector
  • Application
Wall Sensor Switch
120/277 VAC
UL/CSA
Standard Product
Passive Infrared
Adjustable
1000 sq-ft

FEATURES:

  • Sensing Indicators - Passive Infrared - Red LED
  • Environmental - Storage - -40 deg F to 150 deg F (-40 deg C to 65 deg C), 20% to 90% non condensing relative humidity
  • Environmental - Operating Temperature - 32 deg F to 122 deg F (0 deg C to 50 deg C) with rate of change not exceeding 20 deg F(11 deg C) per hour
  • Electrical - Load Capacity - Incandescent - 0 to 1000 watts 120V, Ballast - 0 to 1000 watts 277V, Horsepower rating 1/6
  • Controls - Time Delay - Manual 20 seconds to 30 minutes
  • Controls - Service Switch - OFF (service), Vacancy (manual-ON), Occupancy (auto-ON)
  • Controls - Ambient Light - Photocell, 10 to 500 foot candles
  • Matching wallplate included
  • 3-Way capable
  • Designed for use on 120 or 277V AC circuits, no neutral required, fast retrofits. Built in photocell prevents lights from turning ON with sufficient natural light.
0 deg C to 40 deg C
Mounting Screws
Hubbell
Lighting Circuit
Terminal Screws
Single Circuit