HUBWS2000GY

HUBWS2000GY MFG #: WS2000GY
$62.04 / Each
No stock in your WHS
  • Brand Name: Hubbell Wiring Device-Kellems
  • Offerings: Products
The Hubbell HUBWS2000GY wall switch is designed for use on 120 or 277V AC circuits, no neutral required, fast retrofits. Built in photocell prevents lights from turning ON with sufficient natural light. 3-way capable, matching wallplate included.
  • Application
  • Connector
  • Load
  • Manufacturer Name
  • Mounting
  • Operating Temperature
  • Overview
  • Sensing Range
  • Sensitivity
  • Sensor
  • Special Features
  • Standards
  • Supply Voltage
  • Type
Single Circuit
Terminal Screws
Lighting Circuit
Hubbell
Mounting Screws
0 deg C to 40 deg C

FEATURES:

  • Sensing Indicators - Passive Infrared - Red LED
  • Environmental - Storage - -40 deg F to 150 deg F (-40 deg C to 65 deg C), 20% to 90% non condensing relative humidity
  • Environmental - Operating Temperature - 32 deg F to 122 deg F (0 deg C to 50 deg C) with rate of change not exceeding 20 deg F(11 deg C) per hour
  • Electrical - Load Capacity - Incandescent - 0 to 1000 watts 120V, Ballast - 0 to 1000 watts 277V, Horsepower rating 1/6
  • Controls - Time Delay - Manual 20 seconds to 30 minutes
  • Controls - Service Switch - OFF (service), Vacancy (manual-ON), Occupancy (auto-ON)
  • Controls - Ambient Light - Photocell, 10 to 500 foot candles
  • Matching wallplate included
  • 3-Way capable
  • Designed for use on 120 or 277V AC circuits, no neutral required, fast retrofits. Built in photocell prevents lights from turning ON with sufficient natural light.
1000 sq-ft
Adjustable
Passive Infrared
Standard Product
UL/CSA
120/277 VAC
Wall Sensor Switch