HOFVHDS26

HOFVHDS26 MFG #: VHDS26
$3,340.00 / Each
  • Brand Name: Hoffman
  • Material: Stainless Steel
  • Offerings: Products
nVent HOFFMAN HOFVHDS26 heavy-duty vertical motion pendant arm effortlessly lifts, lowers and repositions HMI enclosures in NEMA Type 4 and 12 environments. Two arm lengths are available with field-adjustable counterbalances to support loads up to 125 lb. No release handle is required to operate the arm.
QTY
  • Manufacturer Name
  • Application
  • Overview
  • Size
  • Special Features
  • Standard
  • Type
nVent
Heavy-duty, stainless steel vertical motion pendant arm provides corrosion resistance and suspends process and control equipment for easy cleaning. Operators in NEMA Type 4X environments can effortlessly lift, lower and reposition HMI enclosures using the pendant arm’s field-adjustable counterbalance.

FEATURES:

  • Two arm lengths are available with field adjustable counterbalances to support loads up to 125 lb
  • No release handle is required to operate the arm
  • Maintains NEMA type 4 and 12 and IEC® IP66 enclosure rating when properly installed per Hoffman instructions
  • Corrosion resistant stainless steel housing with provisions for water drainage from arm
  • 26 in arm supports loads of 45 to 125 lb with 13 in of vertical height adjustment
  • Field adjustable gas spring counterbalance allows the user to adjust lifting force by turning an adjustment mechanism under the arm
  • Angle of gas springs is adjustable (not the pressure), allows lifting force to be increased or decreased at any time for changes in load
  • Tension adjustment at front of the arm provides additional fine tuning of lifting force
  • No locking enclosure handle required, enclosure stays in place when repositioned
  • Easily interfaces with Hoffman HMI enclosures using a 60 x 60 mm enclosure mounting pattern
  • 1-1/4 in internal cable pathway maintains type 4, 4X and 12 enclosure rating and protects wires and cables
  • Gasketed mounting surfaces at both ends of arm maintain seal integrity
  • Enclosure and arm can be swiveled 330 deg with swivel stops available in 30 deg increments

APPLICATIONS:

  • For used to provide corrosion resistance and suspends process and control equipment for easy cleaning
10.18x30.65x4.86 in
Type 304 stainless steel construction, Gas spring counterbalance
Maintains NEMA Type 4, 4X and 12 and IEC IP 66 enclosure ratings when properly installed per Hoffman instructions.
SYSPEND™ VHDS-Motion Arm, Type 4X