HOFVHD26

HOFVHD26 MFG #: VHD26
$2,356.00 / Each
  • Brand Name: Hoffman
  • Material: Steel
  • Offerings: Products
nVent HOFFMAN HOFVHD26 heavy-duty vertical motion pendant arm effortlessly lifts, lowers and repositions HMI enclosures in NEMA Type 4 and 12 environments. Two arm lengths are available with field-adjustable counterbalances to support loads up to 125 lb. No release handle is required to operate the arm.
QTY
  • Overview
  • Manufacturer Name
  • Type
  • Standard
  • Special Features
  • Size
  • Application

FEATURES:

  • Two arm lengths are available with field adjustable counterbalances to support loads up to 125 lb
  • No release handle is required to operate the arm
  • Maintains NEMA type 4 and 12 and IEC® IP66 enclosure rating when properly installed per Hoffman instructions
  • 26 in arm supports loads of 45 to 125 lb with 13 in of vertical height adjustment
  • Field adjustable gas spring counterbalance allows the user to adjust lifting force by turning an adjustment mechanism under the arm
  • Angle of gas springs is adjustable (not the pressure), allows lifting force to be increased or decreased at any time for changes in load
  • Tension adjustment at front of the arm provides additional fine tuning of lifting force
  • No locking enclosure handle required, enclosure stays in place after repositioning
  • Easily interfaces with Hoffman HMI enclosures using a 60 x 60 mm enclosure mounting pattern
  • 1.3 in internal cable pathway maintains NEMA type 4 and 12 enclosure rating and protects wires and cables
  • Gasketed mounting surfaces at both ends of arm maintain seal integrity
  • Enclosure and arm can be swiveled 330 deg with swivel stops available in 30 deg increments
  • Standard models are available with machine top mounting
  • RAL 7035 light gray finish with black end supports

APPLICATIONS:

  • For effortlessly lifts
  • lowers and repositions HMI enclosures in NEMA 4 and 12 environments
nVent
SYSPEND™ VHD-Motion Arm, Type 4
Maintains NEMA Type 4 and 12 and IEC IP66 enclosure rating when properly installed per Hoffman instructions.
Mild steel construction, RAL 7035 light-gray finish with black end supports, Gas spring counterbalance
10.18x30.65x4.86 in
Heavy-duty vertical motion pendant arm effortlessly lifts, lowers and repositions HMI enclosures in NEMA Type 4 and 12 environments. Two arm lengths are available with field-adjustable counterbalances to support loads up to 125 lb. No release handle is required to operate the arm.